Seller Needs:
$498,000|
327
|
0
This 2017 OKUMA MU8000VL Vertical Machining Center offers a blend of advanced features, making it a formidable addition to any manufacturing facility. Built for precision and versatility, it is equipped with a comprehensive s...Read More
Seller Needs:
Payment:
Specs:
X Axis Travel: 39.37"
Y Axis Travel: 21.65"
Z Axis Travel: 23.62"
Spindle Motor: 22 HP
Spindle Speed: 15,000 RPM
Spindle Taper: HSK100
Tool Changer: 48 ATC
Rapid Rate X Axis: 1,968 IPM
Rapid Rate Y Axis: 1,968 IPM
Rapid Rate Z Axis: 1,968 IPM
Max Table Load: 1,540 LBS
A Axis Travel: +90 to -90 (degrees)
C Axis Travel: 360 (degrees)
Table Surface to Spindle Nose: 7.87" to 31.50"
Max Work Size: 39.37" x 21.65"
Floor to Table Top: 47.64"
Max Tool Diameter: 3.94"/5.98"
Max Tool Length: 15.75"
Max Tool Weight: 26.4 LBS
Very low, under 2000 cut hours.
Running hours- 11,840:02
Operating hours- 1,356:01
Cutting hours- 1,115:26
Not operating hours- 10,483:56
Spindle run hours- 1,231:27
Y Axis Travel: 21.65"
Z Axis Travel: 23.62"
Spindle Motor: 22 HP
Spindle Speed: 15,000 RPM
Spindle Taper: HSK100
Tool Changer: 48 ATC
Rapid Rate X Axis: 1,968 IPM
Rapid Rate Y Axis: 1,968 IPM
Rapid Rate Z Axis: 1,968 IPM
Max Table Load: 1,540 LBS
A Axis Travel: +90 to -90 (degrees)
C Axis Travel: 360 (degrees)
Table Surface to Spindle Nose: 7.87" to 31.50"
Max Work Size: 39.37" x 21.65"
Floor to Table Top: 47.64"
Max Tool Diameter: 3.94"/5.98"
Max Tool Length: 15.75"
Max Tool Weight: 26.4 LBS
Very low, under 2000 cut hours.
Running hours- 11,840:02
Operating hours- 1,356:01
Cutting hours- 1,115:26
Not operating hours- 10,483:56
Spindle run hours- 1,231:27
Options:
Probe
Chip Conveyor
5 Axis
Okuma OSP-P3005A-H Control
15,000 RPM Spindle
HSK A100 Spindle
Side Mount 48 ATC
Blum Tool Break detection
Auto Gauging
Gear Cutting Package
Dust Proof for Axis
Dynamic Fixture Offset
Riedel Chiller & Dust Collection
Chip Conveyor with Right Side Disposal
Turning Operation Up to 800 RPM on C Axis
Chip Conveyor
5 Axis
Okuma OSP-P3005A-H Control
15,000 RPM Spindle
HSK A100 Spindle
Side Mount 48 ATC
Blum Tool Break detection
Auto Gauging
Gear Cutting Package
Dust Proof for Axis
Dynamic Fixture Offset
Riedel Chiller & Dust Collection
Chip Conveyor with Right Side Disposal
Turning Operation Up to 800 RPM on C Axis
Seller:
GeorM229
Location:
IL
Further Reading