Pre-owned STRATASYS F370 2021 3D Printer. This unit has hardly been Used. Whether you have production parts, Jigs & Fixtures, or Prototypes, This Stratasys F123 Series Model F370 3D Printer is THE solution for you. ...Read More
Notify Me:
Rigging:
$800
Specs:
X Axis 14"
Y Axis 10"
Z Axis 14"
Up to 4 Materials – ABS, PLA, ASA & PC-ABS
GrabCAD Print
4 slice heights
4 material bays
Auto material change-over
Stratasys Insight Software
Dimensions:1,626 x 864 x 711 mm / 64" x 34" x 28"
Weight: 227 kg (500lbs) with consumables
Technology: FDM® technology
Noise Specifications
During build: 48 dB
When idle: 35 dB
Thermal: Extruder ?300° C
Chamber: 110° C, active convection
Build Size: 355mm x 254mm x 355 mm / 14" x 10" x 14"
Layer Thickness:
ABS: 0.330mm / 0.013"
ASA: 0.254mm / 0.010"
PC-ABS: 0.178mm / 0.007" 0.127mm / 0.005"
Layer Thickness:
Diran 410MF07: 0.330mm (0.013 in)
ABS-CF103: 0.254mm (0.010 in)
ABS-CF103: 0.178mm (0.007 in)
Layer Thickness:
PLA, FDM TPU 92A,
ABS-ESD7 0.254mm (0.010 in)
Model Materials
PLA2, ABS-ESD7â„¢, ABS-M30, ASA, Diranâ„¢ 410MF072,
FDM TPU 92A, PC-ABS, ABS-CF10, QSR
Support material
Cartilage Capacity: 4 material spool bays
2 for model, 2 for support located in a drawer on the front of the unit
Software, GrabCAD Print & Insight software license
Network Connectivity Wired: TCP/IP protocols at 100 Mbps minimum 100 base T, Ethernet protocol, RJ45 connector
Wireless-ready: IEEE 802.11n, g, or b;
Authentication: WPA2-PSK, 802.1x EAP;
Encryption: CCMP, TKIP
System Requirements:
Windows 7, 8, 8.1 and 10 (64bit only) with a minimum of 4GB RAM (8GB or more recommended)
Operating Environment
Operating: Temperature: 15 – 30 ºC (59 – 86 ºF),
Humidity: 30 – 70% RH
Storage:
Temperature: 0 – 35 ºC (32 – 95 ºF),
Humidity: 20 – 90% RH
Power Requirements: 100–132V/15A or 200–240V/7A. 50/60 Hz
Machine serviced by Purple Platypus
Less than 1000 Hrs
No issues, Just don't use it anymore
Works as new. No issues at all
Does not come with warrenty but you can purchase service contract from any local reseller
Y Axis 10"
Z Axis 14"
Up to 4 Materials – ABS, PLA, ASA & PC-ABS
GrabCAD Print
4 slice heights
4 material bays
Auto material change-over
Stratasys Insight Software
Dimensions:1,626 x 864 x 711 mm / 64" x 34" x 28"
Weight: 227 kg (500lbs) with consumables
Technology: FDM® technology
Noise Specifications
During build: 48 dB
When idle: 35 dB
Thermal: Extruder ?300° C
Chamber: 110° C, active convection
Build Size: 355mm x 254mm x 355 mm / 14" x 10" x 14"
Layer Thickness:
ABS: 0.330mm / 0.013"
ASA: 0.254mm / 0.010"
PC-ABS: 0.178mm / 0.007" 0.127mm / 0.005"
Layer Thickness:
Diran 410MF07: 0.330mm (0.013 in)
ABS-CF103: 0.254mm (0.010 in)
ABS-CF103: 0.178mm (0.007 in)
Layer Thickness:
PLA, FDM TPU 92A,
ABS-ESD7 0.254mm (0.010 in)
Model Materials
PLA2, ABS-ESD7â„¢, ABS-M30, ASA, Diranâ„¢ 410MF072,
FDM TPU 92A, PC-ABS, ABS-CF10, QSR
Support material
Cartilage Capacity: 4 material spool bays
2 for model, 2 for support located in a drawer on the front of the unit
Software, GrabCAD Print & Insight software license
Network Connectivity Wired: TCP/IP protocols at 100 Mbps minimum 100 base T, Ethernet protocol, RJ45 connector
Wireless-ready: IEEE 802.11n, g, or b;
Authentication: WPA2-PSK, 802.1x EAP;
Encryption: CCMP, TKIP
System Requirements:
Windows 7, 8, 8.1 and 10 (64bit only) with a minimum of 4GB RAM (8GB or more recommended)
Operating Environment
Operating: Temperature: 15 – 30 ºC (59 – 86 ºF),
Humidity: 30 – 70% RH
Storage:
Temperature: 0 – 35 ºC (32 – 95 ºF),
Humidity: 20 – 90% RH
Power Requirements: 100–132V/15A or 200–240V/7A. 50/60 Hz
Machine serviced by Purple Platypus
Less than 1000 Hrs
No issues, Just don't use it anymore
Works as new. No issues at all
Does not come with warrenty but you can purchase service contract from any local reseller
Options:
PC Based
2 Extrusion Heads
Some Consumables Included
2 Extrusion Heads
Some Consumables Included
Further Reading
