This 2012 HAAS T5C4 Tooling and Work holding 5 axis is a great choice for any shop looking for a reliable and accurate tooling and workholding solution. This 5 axis is in excellent condition, having been used for only one job for about 50 hours and then sitting for 10 years under cover in the seller's shop. The machine was then taken back to Haas and completely rebuilt to the latest spec with new improved rubber shock dampers. It is now sealed in Haas plastic and ready to be shipped. This machine features a tilting 4-head 5C indexer with collets and auto release, and a maximum weight on the platter of 5 lbs. The spindle A (tilt) has a maximum speed of 60°/sec, a maximum torque of 210 ft-lb, a runout max of 0.5", a backlash of 30 arc-sec, a center height of 6", a gear ratio of 90:1, and a timing of 2:1. The indexing A (tilt) has a maximum rotation/step of ±120°, a resolution of 0.001°, an accuracy of ±15 arc-sec, a repeatability of 10 arc-sec, and a worm gear diameter of 6.3". The spindle B (rotary) has 4 heads, a maximum speed of 200°/sec, a maximum torque of 25 ft-lbf, a nose thread of 2 3/16", a runout max of 0.0004", a backlash of 50 arc-sec, a center height of 6", a gear ratio of 60:1, and a collet size of 5C. The indexing B (rotary) has a maximum rotation/step of 999.999°, a resolution of 0.001°, an accuracy of ±60 arc-sec, a repeatability of 10 arc-sec, and a worm gear diameter of 2.8". This machine has dimensions of 47 in x 24 in x 19 in and a weight of 620 lbs. The new price for this machine was $51,695 when it was bought in early 2012. This 2012 HAAS T5C4 indexer and Workholding is a great choice for any shop looking for a reliable and accurate tooling and multiple workholding solution. It is in excellent condition and ready to be shipped.