Specs:
Bar Capacity: 3.54"
Chuck Size: (2) 12" 3 Jaw Hyd
Spindle Speed: 3,800 RPM Both Main, Sub Spindle
Spindle Motor: 30 HP Both Main and Sub Spindle
X Axis Travel: 10.43"
Z Axis Travel: 44.8"
Rapid Rate Z Axis: 787 IPM
Turret Tools: (2) 12 Station
Rapid Rate X Axis: 787 IPM
Max Turning Dia: 11.81"
Max Turning Length: 57"
Max Swing: 25.6"
Dimensions: 84" x 190" x 83"
Weight: 25,000 LBS
Chuck Size: (2) 12" 3 Jaw Hyd
Spindle Speed: 3,800 RPM Both Main, Sub Spindle
Spindle Motor: 30 HP Both Main and Sub Spindle
X Axis Travel: 10.43"
Z Axis Travel: 44.8"
Rapid Rate Z Axis: 787 IPM
Turret Tools: (2) 12 Station
Rapid Rate X Axis: 787 IPM
Max Turning Dia: 11.81"
Max Turning Length: 57"
Max Swing: 25.6"
Dimensions: 84" x 190" x 83"
Weight: 25,000 LBS
Options:
Chip Conveyor
Live Tooling
Sub Spindle
5 Axis
Live Tooling
Sub Spindle
5 Axis
Related:
Pre-owned OKUMA LT25M 1995 CNC Lathe. This CNC Lathe has average cutting time and is equipped with a CNC control. This CNC Machine is currently located in Florida. This OKUMA CNC Lathe is available for a limited time. Get a quote today on this LT25M before it's gone.
Comes equipped as seen in photos with live and static tool holders. This machine has been inspected by our in-house technicians. Alot of value in this machine for the right buyer. No load out cost, FOB Origin.
Chuck Size: (2) 12" 3 Jaw Hyd
Spindle Speed: 3,800 RPM Both Main, Sub Spindle
Spindle Motor: 30 HP Both Main and Sub Spindle
X Axis Travel: 10.43"
Z Axis Travel: 44.8"
Rapid Rate Z Axis: 787 IPM
Turret Tools: (2) 12 Station
Rapid Rate X Axis: 787 IPM
Max Turning Dia: 11.81"
Max Turning Length: 57"
Max Swing: 25.6"
Dimensions: 84" x 190" x 83"
Weight: 25,000 LBS
Live Tooling
Sub Spindle
5 Axis