Seller Needs:
$226,000|
4073
|
0
Pre-owned TRAUB TNX 65/42 2007 CNC Lathe. This CNC Lathe has average cutting time and is equipped with a TX 8i-S control. This CNC Machine is currently located in USA. This TRAUB CNC Lathe is available for a limited time. Ge...Read More
Seller Needs:
Payment:
Specs:
Bar Capacity: 2.6"
Chuck Size: 6.9"
Spindle Speed: 5,000 RPM
Spindle Motor: 24 HP
X Axis Travel: 6.9"
Z Axis Travel: 1.6"
Rapid Rate Z Axis: 1,574 IPM
Turret Tools: 80 Station
Rapid Rate X Axis: 1,181 IPM
Max Turning Length: 25.6"
Tool Holder: HSK-A40
Dimensions: 231" x 134.6" x 106.3"
Weight: 22,000 LBS
Mill X Axis Travel: 13.4"
Mill Z Axis Travel: 25.6"
Mill Y Axis Travel: 1.6"
Mill B Axis Travel: 95°
Mill Spindle Speed: 12,000RPM
Mill Motor: 7.4HP
Chuck Size: 6.9"
Spindle Speed: 5,000 RPM
Spindle Motor: 24 HP
X Axis Travel: 6.9"
Z Axis Travel: 1.6"
Rapid Rate Z Axis: 1,574 IPM
Turret Tools: 80 Station
Rapid Rate X Axis: 1,181 IPM
Max Turning Length: 25.6"
Tool Holder: HSK-A40
Dimensions: 231" x 134.6" x 106.3"
Weight: 22,000 LBS
Mill X Axis Travel: 13.4"
Mill Z Axis Travel: 25.6"
Mill Y Axis Travel: 1.6"
Mill B Axis Travel: 95°
Mill Spindle Speed: 12,000RPM
Mill Motor: 7.4HP
Options:
TX 8i-S
Chip Conveyor
Tool Presetter
Bar Feeder
Parts Catcher
Live Tooling
Sub Spindle
Y Axis
5 Axis
Servo driven gantry receiver
Hydraulic swivel w/ pneumatic finished part and bar remnant gripper
Finished part conveyor belt
RESY paper band coolant filter
Knoll Coolant tank with BKW refrigerated coolant temperature control
20 Bar High pressure and 8 Bar Low pressure coolant pumps
Knoll chip conveyor
FMB Turbo 5-55 magazine bar feeder (new in 2010)
2) Single stick turning tool holders
2) Double stick turning tool holders
1) Cut-off tool holder
1) Overdriven double radial live ER Collet tool holder
1) Overdriven radial live ER Collet tool holder
4) Radial live ER Collet tool holders
1) Radial live End Mill tool holder
1) Angle adjustable live ER Collet tool holder
2) Radial live Shell Mill tool holders
6) Axial live ER Collet tool holders
Hainbuch main spindle collet chuck
Rohm sub spindle 2 jaw chuck
All machine parts, electrical, service and programming manuals along with machine parameter backup on USB stick
Chip Conveyor
Tool Presetter
Bar Feeder
Parts Catcher
Live Tooling
Sub Spindle
Y Axis
5 Axis
Servo driven gantry receiver
Hydraulic swivel w/ pneumatic finished part and bar remnant gripper
Finished part conveyor belt
RESY paper band coolant filter
Knoll Coolant tank with BKW refrigerated coolant temperature control
20 Bar High pressure and 8 Bar Low pressure coolant pumps
Knoll chip conveyor
FMB Turbo 5-55 magazine bar feeder (new in 2010)
2) Single stick turning tool holders
2) Double stick turning tool holders
1) Cut-off tool holder
1) Overdriven double radial live ER Collet tool holder
1) Overdriven radial live ER Collet tool holder
4) Radial live ER Collet tool holders
1) Radial live End Mill tool holder
1) Angle adjustable live ER Collet tool holder
2) Radial live Shell Mill tool holders
6) Axial live ER Collet tool holders
Hainbuch main spindle collet chuck
Rohm sub spindle 2 jaw chuck
All machine parts, electrical, service and programming manuals along with machine parameter backup on USB stick
Seller:
JohnL914
Location:
MN
Further Reading
