2016 TSUGAMI B038TE

Max. Bar Stock: 38 mm
Number of Axes: 9
Sliding Headstock/Guide Bushing: Yes
Tool Positions (std/max): 45 Max.
Live Tool Positions (std/max) (Turret): 8 Rotary Tools
Main Spindle Speed: 200-5,000 RPM
Sub Spindle Speed: 200-7,000 RPM
Live Tool Speed: 200-8,000 RPM
Main Spindle Motor: 7.5/11 kW
Weight: 6,200 kg
Footprint: 3,247x1,875x1,840 mm

Machining Range Main Spindle
Max. Chucking Barstock Diameter: 8-38 mm
Max. Machining length: 250 mm
Max. Drilling Diameter: 16 mm
Max. Tapping Diameter: M14

Back Spindle Turret
Max. Spindle Chucking Diameter: 38 mm
Max. Spindle Drilling Diameter: 16 mm
Max. Spindle Tapping size: M12

Front Tool Post
Max. Cross Drilling Diameter: 10 mm
Max. Cross Tapping size Diameter: M6

Turret
Max. Rotary Tool Drilling Diameter: 16 mm
Max. Rotary Tool Tapping size: M10

Back Tool Post
Max. Rotary Tool Drilling Diameter: 8 mm
Max. Rotary Tool Tapping Size: M6
Max. Fixed Tool Drilling Diameter: 10 mm
Max. Fixed Tool Tapping Size: M10

Machine Capacity
Main Spindle speed: 200-5000 RPM
Back Spindle Speed: 200-7000 RPM
Cross Drill Speed on Front Post: 200-5000 RPM
Total Tool Number (standard spec): 200-8000 RPM

Main & Back Spindle Indexing C-Axis
Motor
Main Spindle: 7.5/11 kW
Back Spindle: 3.7/5.5 kW
Live Tool on Front Tool Post: 1 kW
Live Tool on Turret:1.4 kW
Live Tool on Back tool post: 1 kW
Coolant pump: 0.4 kW
Lubricating Pump: 3 W
Compressed air requirement 0.5 MPa or above
Air discharge rate: 100 NL/min
Power source requirements: 45 kVA
Total Tool Storage Capacity
Turret 8 stations (4x8=32 sta)
Front tool post (standard) Turning 7
Front tool post Turning 3
Cross drill 3 (optional)

Tool size
Turret: 20mm x 20mm x 1 25mm
Front tool post: 16mm x 16mm x 125mm

Rapid Traverse rate
X1, X2, X3 24m/min
Y1, Y2, Y3 24m/min
Z1, Z2, Z3 24m/min

FANUC 31i-B
Chip Conveyor
Live Tooling
Sub Spindle
Y Axis
5 Axis
Chip Conveyor (flat type), Work front discharge with M-code oil blow
Turret Coolant piping with M-code oil blow
C-Axis Control for Main & Back Spindle
Tool Box, N.4 Drill Holder (diam. 32, turret/ref .3262-H01A)
(2) 2-Drill Holder (diam 25x2), (5) Turning Holder (20 sq)
Front Holder (20 sq), (2) Cross Drill Head
3-Spindle Cross Drill + 3 Pos. OD Tools
(6) Drill Holder for Back Tool post
(2) 2-Turning Holder, (2) Power Drill Head
Rigid Tapping Function (3-Cross, Turret tool, back tool)
Helical & Cylindrical interpolation
Polar Coordinate Interpolation
Handle retrace function, European display
Main Spindle adaptor (Schaublin 76-00740 F37 Max Diam 32)
Sub Spindle adaptor (Scahublin 76-00740 F37 Max diam 32)
Guide Bush adaptor (Neukonm 28.001 max diam 32)
M-Code oil blow (Turret, Ejector, main Spindle, Back Spindle, Back Tool post)
Coolant block for back tool post
(3) Back adaptor (diam. 25), Bar feeder interface, R232C Interface
High Pressure Coolant 1,5W (2MPa)
Main Spindle adaptor (for Dunner F47/37 AC or Tsugami 2601-1234 max diam 38)
Back Spindle adaptor (for Dunner F48/38 AC or Tsugami 2601-5230 max diam 38)
Guide Bush adaptor (for Dunner B240 or Tsugami 2621-1234 max diam 38)
Record-S Magazine Type Bar Feeder