Seller Needs:
$23,625|
11
|
0
Pre-owned LAGUNA SWIFT 4X8 2022 Router. This Router has average cutting time and is equipped with a CNC control. This CNC Machine is currently located in USA. This LAGUNA Router is available for a limited time. Get a quote today on this SWIFT 4X8 before it's gone.
Seller Needs:
Payment:
Specs:
48" X 96" Swift 3HP Liquid Cooled Spindle.
4' X 8' CUTTING AREA
3 HP LIQUID-COOLED SPINDLE, 208-230V,
4' X 8' TABLE WITH VACUUM READY TABLE (VACUUM PUMP SOLD SEPARATELY)
LAGUNA SWIFT DRIVE SYSTEM (PLUG-AND-PLAY MOTOR REPLACEMENT):
- X AXIS - PRECISION HELICAL RACK AND PINION
- Y AXIS - PRECISION HELICAL RACK AND PINION
- Z AXIS - PRECISION GROUND BALL SCREW
DUST HOOD
E-STOP
HOMING SWITCHES AND SOFT LIMITS ON ALL AXES
RIGID, STRUCTURAL STEEL AND CAST IRON FRAME
LAGUNA HANDHELD CNC CONTROLWeight: 5,500
vacuum table
c|flux 3hp 220v cyclone vacuum
SV400/1
276 cfm open flow,
10.2” HgV max vacuum
6.6 kW (8.9 HP) motor
Integrated relief valve and fittings
Tooling Kit - Swift w/ Vacuum
1 - 1-1/2" straight bit
1 - 1/4" down shear spiral
1 - 3/8" down shear spiral
1 - 90 degree v-bit
1 - 1/4" compression bit
1 - 3/8" compression bit
2 - 1/4" ER20 collets
2 - 3/8" ER20 collets
1 - 10mm ER20 collet
1 - 1/2" ER20 collet
1- 5mm Brad Point
***** LESS THAN 100 HOURS OF RUN TIME ******
4' X 8' CUTTING AREA
3 HP LIQUID-COOLED SPINDLE, 208-230V,
4' X 8' TABLE WITH VACUUM READY TABLE (VACUUM PUMP SOLD SEPARATELY)
LAGUNA SWIFT DRIVE SYSTEM (PLUG-AND-PLAY MOTOR REPLACEMENT):
- X AXIS - PRECISION HELICAL RACK AND PINION
- Y AXIS - PRECISION HELICAL RACK AND PINION
- Z AXIS - PRECISION GROUND BALL SCREW
DUST HOOD
E-STOP
HOMING SWITCHES AND SOFT LIMITS ON ALL AXES
RIGID, STRUCTURAL STEEL AND CAST IRON FRAME
LAGUNA HANDHELD CNC CONTROLWeight: 5,500
vacuum table
c|flux 3hp 220v cyclone vacuum
SV400/1
276 cfm open flow,
10.2” HgV max vacuum
6.6 kW (8.9 HP) motor
Integrated relief valve and fittings
Tooling Kit - Swift w/ Vacuum
1 - 1-1/2" straight bit
1 - 1/4" down shear spiral
1 - 3/8" down shear spiral
1 - 90 degree v-bit
1 - 1/4" compression bit
1 - 3/8" compression bit
2 - 1/4" ER20 collets
2 - 3/8" ER20 collets
1 - 10mm ER20 collet
1 - 1/2" ER20 collet
1- 5mm Brad Point
***** LESS THAN 100 HOURS OF RUN TIME ******
Options:
Dust Collector
Vacuum System
Hold Down
Vacuum System
Hold Down
Seller:
JacoB366
Location:
USA
Further Reading
