Used MITSUBISHI FX10 EDM
Pre-owned MITSUBISHI FX10 2013 EDM. This EDM has average cutting time and is equipped with a Mitsubishi control. This CNC Machine is currently located in USA. This MITSUBISHI EDM is available for a limited time. Get a quote today on this FX10 before it's gone.
Specs:
MFG 1996 / Refurbished 2013
X Axis Travel: 13.77"
Y Axis Travel: 9.84"
Z Axis Travel: 8.66"
Max workpiece: 31.39"x 22.63" x8.46"
Max workpiece weight: 1102 lbs
Max workpiece thickness: 8.46"
Table height: 35.5"
Table rapid-feed speed: 51.18"
Max wire-feed rate: 590.55"
Wire diameter: 0.0078"-0.011"
Wire Diameter: 0.2-0.3 MM
Max Wire Feed Speed: 250 mm/Sec
Wire Tension: 2~25
Working Tank Volume: 400l (105.7 gal.)
Automatic wire threader
Water Chiller
Wire chopper
Auto Way lube option
The machine had all ball screws replaced and laser calibrated by Mitsubishi in 2013.
By MC Machiniery Systms, Inc.
The chiller was replaced with a refurbished one in 2016.
Dimensions: 53" x 75" x 75"
Weight: 4,000
X Axis Travel: 13.77"
Y Axis Travel: 9.84"
Z Axis Travel: 8.66"
Max workpiece: 31.39"x 22.63" x8.46"
Max workpiece weight: 1102 lbs
Max workpiece thickness: 8.46"
Table height: 35.5"
Table rapid-feed speed: 51.18"
Max wire-feed rate: 590.55"
Wire diameter: 0.0078"-0.011"
Wire Diameter: 0.2-0.3 MM
Max Wire Feed Speed: 250 mm/Sec
Wire Tension: 2~25
Working Tank Volume: 400l (105.7 gal.)
Automatic wire threader
Water Chiller
Wire chopper
Auto Way lube option
The machine had all ball screws replaced and laser calibrated by Mitsubishi in 2013.
By MC Machiniery Systms, Inc.
The chiller was replaced with a refurbished one in 2016.
Dimensions: 53" x 75" x 75"
Weight: 4,000
Options:
Mitsubishi
Price:
$26,900
$22,500
$22,500
Payment:
Owner:
Jay (Machine Shop in USA)
