This 2021 TORMACH 8L CNC Lathe is a standout choice for any workshop seeking advanced machining capabilities with a user-friendly design. Outfitted with the PathPilot CNC controller, this lathe ensures precision and ease of c...Read More
Rigging:
$1,200
Specs:
2021 Tormach 8L CNC Lathe
30 Day Power Up Guarantee for all mechanical and electrical components with Return / Repair Option.
SPECS:
Spindle Speed: 6,000 RPM
X Axis Travel: 10"
Z Axis Travel: 10"
through spindle bore: 1in
maximum workpiece length with tailstock: 10in
maximum feed rate x and z axis: 150IPM
tailstock taper: MT2
tailstock diameter: 0.9in
tailstock travel: 2.2in
table length: 7.5in
table width: 4in
maximum swing over bed: 8in
maximum swing over carriage: 4in
machine footprint: 42 x 36in
overall system height: 72in
coolant tank capacity: 6gal
primary power required: Single-Phase 115 Vac, 50/60 Hz
recommended circuit amperage: Dedicated 15 A breaker
Hours: only 20 cut hours
Seller: lightly used and no longer needs, selling both his mill and lathe
Condition: Very Good, just needs to be cleaned.
30 Day Power Up Guarantee for all mechanical and electrical components with Return / Repair Option.
SPECS:
Spindle Speed: 6,000 RPM
X Axis Travel: 10"
Z Axis Travel: 10"
through spindle bore: 1in
maximum workpiece length with tailstock: 10in
maximum feed rate x and z axis: 150IPM
tailstock taper: MT2
tailstock diameter: 0.9in
tailstock travel: 2.2in
table length: 7.5in
table width: 4in
maximum swing over bed: 8in
maximum swing over carriage: 4in
machine footprint: 42 x 36in
overall system height: 72in
coolant tank capacity: 6gal
primary power required: Single-Phase 115 Vac, 50/60 Hz
recommended circuit amperage: Dedicated 15 A breaker
Hours: only 20 cut hours
Seller: lightly used and no longer needs, selling both his mill and lathe
Condition: Very Good, just needs to be cleaned.
Options:
PathPIlot
Tailstock
PathPilot CNC controller
HD metal table if needed
30 Day Power Up Guarantee on all mechanical and electrical components
30 Day Return / Repair Option
Tailstock
PathPilot CNC controller
HD metal table if needed
30 Day Power Up Guarantee on all mechanical and electrical components
30 Day Return / Repair Option
Seller:
MattO161
Location:
NM
Further Reading
Hello!
