Seller Needs:
$15,000|
59
|
0
Pre-owned DMG MORI SEIKI MILLTAP 700 2013 Vertical Machining Center. This Vertical Machining Center has average cutting time and is equipped with a CNC control. This CNC Machine is currently located in Oregon. This DMG MORI S...Read More
Seller Needs:
Payment:
Specs:
X Axis Travel: 27.6"
Y Axis Travel: 16.5"
Z Axis Travel: 15"
Rapid Rate X Axis: 2,362 IPM
Rapid Rate Y Axis: 2,362 IPM
Rapid Rate Z Axis: 2,362 IPM
Max Table Load: 882 LBS
Spindle Motor: 15 HP
Spindle Speed: 24,000 RPM
Spindle Taper: BT30
Tool Changer: 25 ATC
Rapid Traverse: 2,362 IPM
Table Size: 33.1" x 16.5"
Table Load (approx.): 882 lbs. Max.
Weight: 7,480 LBS
Equipment Dimensions (approx.): 72" x 116” x 120” Tall
Electrics: 230 Volt, 3 Phase, 60 Hz, 35 Amp
Main Motor: 14 KVA (20 HP)
Advertised specifications and functionality history is taken from 1st-hand inspection, owner interview, manuals, and OEM research. While specifications are assumed accurate, confirmation by purchasing entity is always recommended.
There are two (2) sister machines
This unit is one of two sister machines; this unit is NOT wired for 4th-Axis. Both machines require scale replacement on at least one axis. These machines also have one (1) extra spindle assembly that was ordered for replacement prior to diagnosing a problem with the drawbar. This assembly has maybe one month's service and is packed in a box as a spare part.
Equipment is under power; available for inspection.
Buyer responsible for rigging and loading onto transportation.
Buyer responsible for freight logistics and expenses.
Y Axis Travel: 16.5"
Z Axis Travel: 15"
Rapid Rate X Axis: 2,362 IPM
Rapid Rate Y Axis: 2,362 IPM
Rapid Rate Z Axis: 2,362 IPM
Max Table Load: 882 LBS
Spindle Motor: 15 HP
Spindle Speed: 24,000 RPM
Spindle Taper: BT30
Tool Changer: 25 ATC
Rapid Traverse: 2,362 IPM
Table Size: 33.1" x 16.5"
Table Load (approx.): 882 lbs. Max.
Weight: 7,480 LBS
Equipment Dimensions (approx.): 72" x 116” x 120” Tall
Electrics: 230 Volt, 3 Phase, 60 Hz, 35 Amp
Main Motor: 14 KVA (20 HP)
Advertised specifications and functionality history is taken from 1st-hand inspection, owner interview, manuals, and OEM research. While specifications are assumed accurate, confirmation by purchasing entity is always recommended.
There are two (2) sister machines
This unit is one of two sister machines; this unit is NOT wired for 4th-Axis. Both machines require scale replacement on at least one axis. These machines also have one (1) extra spindle assembly that was ordered for replacement prior to diagnosing a problem with the drawbar. This assembly has maybe one month's service and is packed in a box as a spare part.
Equipment is under power; available for inspection.
Buyer responsible for rigging and loading onto transportation.
Buyer responsible for freight logistics and expenses.
Options:
Chip Conveyor
Mosnic RF2060RA2A Lubricant System
Coolant Tank & Pump
Tooling/Toolholders/Collets
Mosnic RF2060RA2A Lubricant System
Coolant Tank & Pump
Tooling/Toolholders/Collets
Seller:
JerrS494
Location:
OR
Further Reading
