Used DOOSAN PUMA MX2600ST CNC Lathe
Pre-owned DOOSAN PUMA MX2600ST 2012 CNC Lathe. This CNC Lathe has average cutting time and is equipped with a Fanuc 31i- A5 control. This CNC Machine is currently located in Florida. This DOOSAN CNC Lathe is available for a limited time. Get a quote today on this PUMA MX2600ST before it's gone.
Specs:
Bar Capacity: 3"
Chuck Size: 10"
Chuck Description: 3 Jaw Samchully
Spindle Speed: 4,000 rpm
Spindle Nose: A2-8
Milling Spindle Speed: 12,000 rpm
Spindle Motor: 30hp
X Axis Travel: 24.80"
Z Axis Travel: 62.40"
Rapid Rate Z Axis: 1,417 IPM
Rapid Rate Y Axis: 1,024 IPM
Tool Positions: 40
Lower Turret Tools: 12
ATC Capacity: 40
Rapid Rate X Axis: 1,417 IPM
Max Turning Dia: 29.90"
Max Turning Length: 60.60"
Max Swing: 39.40"
Parts Catcher: Yes
Tool Presetter: Yes
Chip Conveyor: Yes
Through Spindle Coolant: Yes
Live Tooling Ready: Yes
Dimensions: 239"x103"x119"
Weight: 34,170lbs
Chuck Size: 10"
Chuck Description: 3 Jaw Samchully
Spindle Speed: 4,000 rpm
Spindle Nose: A2-8
Milling Spindle Speed: 12,000 rpm
Spindle Motor: 30hp
X Axis Travel: 24.80"
Z Axis Travel: 62.40"
Rapid Rate Z Axis: 1,417 IPM
Rapid Rate Y Axis: 1,024 IPM
Tool Positions: 40
Lower Turret Tools: 12
ATC Capacity: 40
Rapid Rate X Axis: 1,417 IPM
Max Turning Dia: 29.90"
Max Turning Length: 60.60"
Max Swing: 39.40"
Parts Catcher: Yes
Tool Presetter: Yes
Chip Conveyor: Yes
Through Spindle Coolant: Yes
Live Tooling Ready: Yes
Dimensions: 239"x103"x119"
Weight: 34,170lbs
Options:
Fanuc 31i- A5
Chip Conveyor
Tool Presetter
Parts Catcher
Live Tooling
Sub Spindle
Y Axis
5 Axis
9 Axis Lathe
Chip Conveyor
Tool Presetter
Parts Catcher
Live Tooling
Sub Spindle
Y Axis
5 Axis
9 Axis Lathe
Owner:
Jerry (Machine Shop in USA)
