Pre-owned FANUC ROBODRILL 2009 Vertical Machining Center. This Vertical Machining Center has average cutting time and is equipped with a Fanuc control. This CNC Machine is currently located in Maryland. This FANUC Vertical Machining Center is available for a limited time. Get a quote today on this ROBODRILL before it's gone.
Notify Me:
Specs:
Table dimensions: 33.46” x 16.14”
Table load capacity: 220 lbs.
Table top to spindle face: 4.49” to 17.52”
Table surface: 3 T slots
X axis travel: 27.55”
Y axis travel: 15.74”
Z axis travel: 12.99”
Pallet change time: 7 seconds
Spindle speed: 24k RPM
Spindle taper: BT 30
Maximum rigid tap speed: 8k RPM
Spindle motor: 5 HP
Rapid federate (X,Y,Z): 2.125 in/min.
Cutting federate (X,Y,Z): 0.1 to 1,181 IPM
Automatic tool changer: 21 tools
Maximum tool length: 9.84”
Tool change time: 1.6 sec. (tool to tool)
Tool change time: 2.4 sec (chip to chip)
Tool change system: drum/turret style
Pallet size: 27.55” x 15.35”
Number of pallets: (2)
Table load capacity: 220 lbs.
Table top to spindle face: 4.49” to 17.52”
Table surface: 3 T slots
X axis travel: 27.55”
Y axis travel: 15.74”
Z axis travel: 12.99”
Pallet change time: 7 seconds
Spindle speed: 24k RPM
Spindle taper: BT 30
Maximum rigid tap speed: 8k RPM
Spindle motor: 5 HP
Rapid federate (X,Y,Z): 2.125 in/min.
Cutting federate (X,Y,Z): 0.1 to 1,181 IPM
Automatic tool changer: 21 tools
Maximum tool length: 9.84”
Tool change time: 1.6 sec. (tool to tool)
Tool change time: 2.4 sec (chip to chip)
Tool change system: drum/turret style
Pallet size: 27.55” x 15.35”
Number of pallets: (2)
Options:
Fanuc
Chip Conveyor
Chip Conveyor
Further Reading
