Used MORI SEIKI ZT1500Y CNC Lathe
Pre-owned MORI SEIKI ZT1500Y 2004 CNC Lathe. This CNC Lathe has average cutting time and is equipped with a MSG-501 control. This CNC Machine is currently located in USA. This MORI SEIKI CNC Lathe is available for a limited time. Get a quote today on this ZT1500Y before it's gone.
Specs:
CNC TWIN SPINDLE, TWIN TURRET, Y-AXIS TURNING CENTER
General Specifications
Chuck Size: (2) 6” 3-JAW CHUCKS
Maximum Swing 15"
Max. Turning Diameter / Length 7.4" / 4.7"
Distance Between Spindles: 29.5"
X-Axis Travel Upper / Lower: 5.5" / 5.5"
Z-Axis Travel Upper / Lower: 17.7" / 17.3"
Y-Axis Travel: +/- 1.5"
B-Axis Travel: (Headstock #2) 20.7"
Spindle Nose / Spindle Bore: A2-6" / 2.0"
Spindle Speeds: (both) 60 – 6,000 RPM
Spindle Motor: 25 HP
Rotary Tooling Speeds: 6,000 RPM
Rotary Tool Motor: 7.5 HP
Number of Turret & Stations: (both) 2 x 12 Positions
Rapid Traverse Rates: X, Y, Z 708 / 236 / 944 IPM
Equipped With:
MAPPS MSG-501 Conversational CNC Control / Fanuc 18iTB
Automatic Tool Setter
Two (2) 12 Station Turrets
Two (2) Spindles
Full C Axis Spindle Incremental Movement
Milling & Y Axis Capability
(2) Kitagawa 3-JAW chucks
LNS Servo 80 Bar Feeder
Automatic Parts Catcher
Parts Offload Conveyor
Chip Conveyor
RS-232C Port for DNC Interface
MISTCapture AM30 Mist Collection System
ASK FOR TOOLING & Work Holding PACKAGE LIST
General Specifications
Chuck Size: (2) 6” 3-JAW CHUCKS
Maximum Swing 15"
Max. Turning Diameter / Length 7.4" / 4.7"
Distance Between Spindles: 29.5"
X-Axis Travel Upper / Lower: 5.5" / 5.5"
Z-Axis Travel Upper / Lower: 17.7" / 17.3"
Y-Axis Travel: +/- 1.5"
B-Axis Travel: (Headstock #2) 20.7"
Spindle Nose / Spindle Bore: A2-6" / 2.0"
Spindle Speeds: (both) 60 – 6,000 RPM
Spindle Motor: 25 HP
Rotary Tooling Speeds: 6,000 RPM
Rotary Tool Motor: 7.5 HP
Number of Turret & Stations: (both) 2 x 12 Positions
Rapid Traverse Rates: X, Y, Z 708 / 236 / 944 IPM
Equipped With:
MAPPS MSG-501 Conversational CNC Control / Fanuc 18iTB
Automatic Tool Setter
Two (2) 12 Station Turrets
Two (2) Spindles
Full C Axis Spindle Incremental Movement
Milling & Y Axis Capability
(2) Kitagawa 3-JAW chucks
LNS Servo 80 Bar Feeder
Automatic Parts Catcher
Parts Offload Conveyor
Chip Conveyor
RS-232C Port for DNC Interface
MISTCapture AM30 Mist Collection System
ASK FOR TOOLING & Work Holding PACKAGE LIST
Options:
MSG-501
Chip Conveyor
Tool Presetter
Bar Feeder
Parts Catcher
Live Tooling
Sub Spindle
Y Axis
Chip Conveyor
Tool Presetter
Bar Feeder
Parts Catcher
Live Tooling
Sub Spindle
Y Axis
Owner:
Axel (Machine Shop in ND)
