Used DMG MORI SEIKI DMU50P Vertical Machining Center
Pre-owned DMG MORI SEIKI DMU50P 2014 Vertical Machining Center for only $149,900. This Vertical Machining Center has average cutting time and is equipped with a DMG Mori ErgoLine Siemens control. This CNC Machine is currently located in OH. This DMG MORI SEIKI Vertical Machining Center is the only one in stock and available for a limited time. Get a quote today on this DMU50P before it's gone.
Specifications:
X Axis Travel: 19.7"
Y Axis Travel: 17.7"
Z Axis Travel: 15.7"
Rapid Rate X Axis: 1,181 IPM
Rapid Rate Y Axis: 1,181 IPM
Rapid Rate Z Axis: 1,181 IPM
Table Size: 24.8 x 19.7
Max Table Load: 661 LBS
Spindle Motor: 20 HP
Spindle Speed: 18,000 RPM
Spindle Taper: HSK-63 CT
Tool Changer: 30 ATC
B-Axis -35/+110 deg
C-Axis 360 deg rotation
Cutting Federate: 315 in/min
Tool to Tool: 1.57 secs
Chip to Chip: 5.79 secs
Maximum Tool Length: 11.8"
Maximum Tool Diameter: 5.1"
Maximum Tool Weight: 17.6 lbs
Y Axis Travel: 17.7"
Z Axis Travel: 15.7"
Rapid Rate X Axis: 1,181 IPM
Rapid Rate Y Axis: 1,181 IPM
Rapid Rate Z Axis: 1,181 IPM
Table Size: 24.8 x 19.7
Max Table Load: 661 LBS
Spindle Motor: 20 HP
Spindle Speed: 18,000 RPM
Spindle Taper: HSK-63 CT
Tool Changer: 30 ATC
B-Axis -35/+110 deg
C-Axis 360 deg rotation
Cutting Federate: 315 in/min
Tool to Tool: 1.57 secs
Chip to Chip: 5.79 secs
Maximum Tool Length: 11.8"
Maximum Tool Diameter: 5.1"
Maximum Tool Weight: 17.6 lbs
Equipped With:
DMG Mori ErgoLine Siemens
Probe
Chip Conveyor
Coolant Thru Spindle
5 Axis
Blum Spindle Probe
Blum Laser Tool Setter
Through Spindle Coolant with 10 Micron Filtration
3D Quickset
Spindle Temperature Controller
Probe
Chip Conveyor
Coolant Thru Spindle
5 Axis
Blum Spindle Probe
Blum Laser Tool Setter
Through Spindle Coolant with 10 Micron Filtration
3D Quickset
Spindle Temperature Controller
Seller:
Aaron (Machine Shop in USA)
