Unveiling an industrious marvel from 2019 – a HAAS VF4SS Vertical Machining Center awaits a new assignment. Nestled in sunny California, this companion has diligently contributed towards the production of aftermarket el...Read More
Notify Me:
Specs:
X Axis Travel: 50"
Y Axis Travel: 20"
Z Axis Travel: 25"
Rapid Rate X Axis: 1,400 IPM
Rapid Rate Y Axis: 1,400 IPM
Rapid Rate Z Axis: 1,400 IPM
Max Table Load: 1,750 LBS
Spindle Motor: 30 HP
Spindle Speed: 12,000 RPM
Spindle Taper: 40 CT
Tool Changer: 24 ATC
Spindle Nose to Table: 4.2" - 29.2"
Max Torque 90 ft-lbf @ 2000 rpm
Max Weight on Table (evenly distributed) 1750 lb
Table Size: 52" x 18"
Dimensions: 131" x 102" x 109"
Weight: 13,500 LBS
4th axis drive TSC HRT-210 rotary with below Trunnion details: Custom Stallion 9/35/DBS - trunnion built for rotary table. Mounting surface of 9 x 35 will be flat within .001, tir of .001 and square to faceplate within .001. Double-sided for mounting parts, fixtures or any other tooling on both sides of trunnion. Fixture will come with row of M12 tapped holes on each face for RL96A-56 and RL96A-3613S2.
Hydraulic clamping outboard support to supplement rotary table brake holding. Comes complete with air over hydraulic pump, hydraulic lines and fittings. With extra air over hydraulic pump. 3.5" riser for HRT210 rotary and outboard support.
Y Axis Travel: 20"
Z Axis Travel: 25"
Rapid Rate X Axis: 1,400 IPM
Rapid Rate Y Axis: 1,400 IPM
Rapid Rate Z Axis: 1,400 IPM
Max Table Load: 1,750 LBS
Spindle Motor: 30 HP
Spindle Speed: 12,000 RPM
Spindle Taper: 40 CT
Tool Changer: 24 ATC
Spindle Nose to Table: 4.2" - 29.2"
Max Torque 90 ft-lbf @ 2000 rpm
Max Weight on Table (evenly distributed) 1750 lb
Table Size: 52" x 18"
Dimensions: 131" x 102" x 109"
Weight: 13,500 LBS
4th axis drive TSC HRT-210 rotary with below Trunnion details: Custom Stallion 9/35/DBS - trunnion built for rotary table. Mounting surface of 9 x 35 will be flat within .001, tir of .001 and square to faceplate within .001. Double-sided for mounting parts, fixtures or any other tooling on both sides of trunnion. Fixture will come with row of M12 tapped holes on each face for RL96A-56 and RL96A-3613S2.
Hydraulic clamping outboard support to supplement rotary table brake holding. Comes complete with air over hydraulic pump, hydraulic lines and fittings. With extra air over hydraulic pump. 3.5" riser for HRT210 rotary and outboard support.
Options:
Haas Next Gen CNC Control
Probe
Coolant Thru Spindle
4th Axis Rotary Table
Macros
Rotation and Scaling
Rigid Tapping
Spindle Orientation
High Speed Machining
VPS Editing
1 GB Memory
Wireless Networking
Compensation Tables
4th Axis Drive & Wiring
HRT-210 4th Axis Rotary Table with Trunnion
Probe
Coolant Thru Spindle
4th Axis Rotary Table
Macros
Rotation and Scaling
Rigid Tapping
Spindle Orientation
High Speed Machining
VPS Editing
1 GB Memory
Wireless Networking
Compensation Tables
4th Axis Drive & Wiring
HRT-210 4th Axis Rotary Table with Trunnion