The power supply is a 130 A, 150-VDC constant-current supply. It contains the circuitry to ignite a torch, a heat
exchanger and pump to cool the torch. The power supply has a serial interface to provide communication with a CNC
controller. Auto Multigas control System
The torch can cut 12 mm mild steel at up to 2032 mm/min (1/2 inch at up to 80 ipm). The maximum production cutting
capability of the torch is 16 mm (5/8 inch) for Hy Definition and conventional cutting. Maximum pierce capability is 32
mm (1.25 inch) for mild steel and 19 mm (3/4 inch) for stainless steel and aluminum. The maximum severance capability
is 38 mm (1.5 inch) for mild steel and 25 mm (1 inch) for stainless steel and aluminum.
• Z-Axis Clearance: 38.5" (without a cutting table)
• Z axis Working Range: 38" to 26"
• Z-Axis Travel: 12"
• Work Area 240” by 98” (10ft sections can be added)
• Auto Multigas Plasma
• Power 480 VAC 3phase Machine 25amps Plasma 30amps
• Repeatability: +/- .001"
• Positional Displacement Accuracy: +/- .010" over 10 feet
• Cutting Speed: 800 ipm
• Rapid Traverse: 1,000 ipm
• Drive System X and Y axis: Rack and Pinion currently
• Drive System Z axis: Balls Screw
Used 2018 MultiCam 6000 Plasma Hypertherm HPR130 XD Low Hours
Page 3 of 19
• High-Speed contouring
• Fully programmable retract between parts.
• Automatic initial pierce height
• User-friendly MultiCam Controller
• Material Database
• Modular X-axis beams are made from heavy are made from heavy
tubing with machined bearing references
tubing with machined bearing references
• Ground roller ways with integrated rack
and wipers
• Gantry has front mounted linear bearing and
robust rack drive
• Stress-relieved heavy duty all steel construction.
• Standard Ethernet communications
• Single carriage can support Oxy-fuel and Plasma with torch
height contro
