Used DMG MORI SEIKI NHX4000 Horizontal Machining Center

Pre-owned DMG MORI SEIKI NHX4000 2018 Horizontal Machining Center. This Horizontal Machining Center has <100 cutting time and is equipped with a CELOS Fanuc F31iB and 21.5in ERGOline Touch MAPPS V control. This CNC Machine is currently located in Nevada. This DMG MORI SEIKI Horizontal Machining Center is available for a limited time. Get a quote today on this NHX4000 before it's gone.

NHX4000 Gen 3
X Axis Travel: 22"
Y Axis Travel: 22"
Z Axis Travel: 26"
Rapid Rate X Axis: 2,362 IPM
Rapid Rate Y Axis: 2,362 IPM
Pallet Size: 15.7"
Spindle Speed: 20,000 RPM
Spindle Motor: 50 HP
Spindle Taper: 40 CT
Tool Changer: 60 ATC
Dimensions: 165.9" x 107.1" x 98.9"
Weight: 16,720 LBS
Machine was set up and never run. The job didn't come through.
<100 hours
CELOS Fanuc F31iB and 21.5in ERGOline Touch MAPPS V
Chip Conveyor
Coolant Thru Spindle
360,000 Full 4th
Oil Cooler Spindle Cooling (Water-glycol chiller)
MagnaScale SMART Scale Direct Scale Feedback (X, Y, & Z Axes)
Tool Breakage Detection System at the Tool Magazine
Zero Sludge Coolant Tank
Automatic Tool Length Measuring Device & Broken Tool Detection
Renishaw OMP60 Spindle Probe Workpiece Measuring System
Program Storage 16GB with 10,000 Registerable Program
Tool Life Management System
High Speed Machining AICC II
Dynamic Fixture Offset - Workpiece Position Compensation for Rotary Axis
Custom Macro Common Variables 600 in tota
Coordinate System Rotation
Tool Offsets (64 pairs)
Programmable Mirror Image
(2) Cast Iron Tombstones NEW Cost $22,000 for the pair
Roy (Machine Shop in AZ)

Similar Listings