2007 MAZAK QTN200-IIM

This 2007 MAZAK QTN200-IIM is equipped with a Chip Conveyor and Tailstock, adding notable efficiency to its operation. This machine offers substantial versatility and is well-suited for various machining tasks.

While used, it remains in good working condition under stock number 119809. It features the Mazatrol Matrix Nexus machine control and incorporates a collet chuck size, which accommodates a maximum cutting diameter of 13.78" and a maximum machining length of 21.28".

The X-axis travel extends up to 7.5", while the Z-axis goes to 21.12". It supports a maximum swing of 24", with a swing over the cross slide at 14". The turret type is a drum with 12 positions, providing diverse tooling options for different tasks.

The spindle's nose, bore, and bar capacity are A2-6", 2.99", and 2.5", respectively. This model can reach a spindle speed of 5,000 RPM, powered by a motor that can deliver 35 HP for a short period or maintain a 30 HP output continuously. The rotary tool speed is 4,500 RPM, powered by a 7.5 HP motor, which augments the device's capability.

Rapid traverse rates are 1181 IPM along the X-axis and 1299 IPM along the Z-axis. The tailstock center is rated MT #5, with a travel capability of 21.75". The machine dimensions are 99.6"x70.1"x72.4", and it weighs 10,803 lbs, showcasing its solid build.

Additional features include Automatic Tool Eye, Rigid Tapping, G54.1, EIA/ISO compatibility, Geometric Scaling, Programmable Tailstock, and Tilted Work Plane. The machine also incorporates Pitch Error Compensation and features such as EIA Helical Tap Cycle, EIA Pattern Cycle, and a 213 PSI High-Pressure Coolant System. A mist collector is embedded for clean operations.

The unit supports Thread Inverse Time and Polar Coordinate Input and comes with vital tooling equipment and a Jib Crane for lifting tasks. This machine is an optimal choice for operations requiring both precision and adaptability.